iFixit tears down Apple HomeView hub and criticizes its repairability
Specialists at iFixit have torn down HomeView, Apple's smart home hub with a 7-inch screen, and concluded that it is very difficult to repair: there is a lot of adhesive inside, and parts are easily damaged during opening.
To reach the internal components, one must first remove the screen, which is held in place by strong adhesive. A set of driver bits is then required: Apple uses a combination of Phillips and multiple sizes of Torx screws in the device. According to iFixit, the adhesive on the display was "holding stronger than on any Apple product we've opened recently."
The speakers were damaged during disassembly. Their connectors are glued in place: specialists damaged one, and were unable to disconnect the other even after heating and removing the adhesive. The speakers themselves are secured with thick adhesive pads unaffected by isopropyl alcohol, and one of them cracked. Detaching the screen from the base is also difficult: the hinge screws are placed at an awkward angle, and cables run through the hinge. This can only be done using a special tool or by completely taking apart the screen, risking damage to parts. The board is joined to the heat shield with adhesive, and separating them was described by iFixit as an "extremely risky operation," although the aluminum chassis heatsink itself received positive marks.
The base is designed more simply: the bottom panel is held by four Torx screws, the USB-C port is a modular replaceable unit, and the passive radiators can also be replaced. On the board, they found an A18 processor, 8 GB of SK hynix LPDDR5X memory, and a 64 GB Kioxia storage drive. iFixit also noted that the wall-mounted version has noticeably smaller speakers than the desktop model, although both cost $299, and a bracket must be purchased separately for the wall version.
What it means
Both versions of HomeView cost $299, with the bracket for the wall-mounted model sold separately. According to iFixit's assessment, repairing the device is difficult due to the extensive use of adhesive, whereas the USB-C port and passive radiators in the base are replaceable.
Sources
- Hi-Tech Mail: iFixit разобрал HomeView: хаб умного дома Apple оказался почти неремонтопригодным media outlet
- 3DNews: Клея больше, чем электроники: Apple HomeView оказался настоящей катастрофой для ремонта media outlet
- Хабр: iFixit: ремонт Apple HomeView оказался «неоправданно сложным» media outlet
This article was prepared with the help of AI and translated from the Russian original. Spotted an error — let us know.
Published 19 November 2026, 06:46 · No updates · Russian original




Comments on this story live under its post in our Telegram channel. Comment on Telegram